How to Clean Up Drywall Dust?
Drywall dust can be an unfortunate byproduct of any home renovation. It often gets everywhere and it’s hard to clean up! Here are the six best steps illustrated on how to get rid of drywall dust once and for all.
When sanding or cutting drywall sheets, airborne dust contains silica, gypsum, and mica – all of which can irritate your respiratory system and cause allergy symptoms.
From my experience, if you don’t sand and clean drywall dust properly, it may build up on floors, windowsills, doors, walls, carpeting, grout lines, and other surfaces. So how do you remove drywall dust?
How to Clean Up Drywall Dust
Drywall dust can be an unfortunate byproduct of any home renovation. It often gets everywhere and it’s hard to clean up! Here are the six best steps illustrated on how to get rid of drywall dust once and for all:
1. Open all the windows in your house
How you should always open all the windows in your house before starting to clean up drywall dust. This will allow the dust to escape from your home, and also give you a chance to see if there are any leaks or other problems that need to be addressed.
This drywall dust includes asbestos, a hazardous material. Therefore, if you have breathing problems or are allergic to any other materials in the drywall dust, be sure to consult your doctor before beginning this project.
Important: It’s critical that you wear a face mask or a respirator when cleaning with drywall dust since it may contain asbestos and other chemicals
2. Place a fan at the window pointing outside
How to clean up drywall dust by using a fan. It is important to place the fan at the window in order to push the dust outside. This will help keep your home clean and free of dust particles.
Because you’ll be sweeping some of the dust into heaps and collecting it, some dust will inevitably enter the air. A fan at the window and set to blow outside is an excellent method to direct most of that dust outside.
3. Use a vacuum cleaner
Another way to clean up the drywall dust is by using a vacuum cleaner. Make sure that you have a good-quality vacuum cleaner that can suck up all the dust. Be sure to also clean the vacuum cleaner bag or filter after each use in order to prevent the dust from spreading.
4. Sweep and remove the bulk of the drywall dust
When you’re done, sweep the floor and remove as much of the drywall dust as possible. This will make it a lot easier to clean up the remaining dust later on.
Collect the dust in bags with a dustpan after sweeping away most of the drywall dust with a broom. Spray a water mist onto the dust to make it less airborne if necessary.
Keep in mind that you won’t be able to collect all of the dust this way, but you will get the bulk of it. Collect the drywall dust in a trash bag or bucket and wait for it to settle for around 15 minutes before moving on to the next step.
5. Wet mop the floors
If you have hardwood or tile floors, you can wet mop them to clean up the drywall dust. This will help keep the dust from spreading and make it easier to clean up.
Mix a solution of one part vinegar to five parts water in a bucket. Dip your mop in the solution and mop the floors. You can also use a wet vacuum to clean up the dust.
6. Vacuum the floors and other surfaces
After you’ve vacuumed the floors and other surfaces, go over them with a damp cloth to remove any residual dust. You may also want to consider using a dehumidifier to help reduce the amount of dust in the air.
7. Ventilate the room
How important it is to ventilate the room when you’re working with drywall dust. Not only will it help clear the air and make the work area more comfortable, but it will also help reduce the amount of dust in the air. Make sure to open windows and doors to allow fresh air to circulate, and use a fan to move the air around.
Conclusion
Drywall dust can be a real nuisance, but with these six steps you can clean it up once and for all! Make sure to follow the instructions closely and you’ll be able to get your home back to normal in no time.
