Many RCA TV owners (even those with Roku TV editions) experience the same problem: their RCA TV won’t turn on. Some claim it has been an ongoing problem for years.
Fortunately, there’s an easy fix that will revolve around 80% of RCA TVs not turning on.
There are several reasons why your RCA TV won’t turn on. For example, it could be that the power button is stuck, the red light is blinking or there is nothing happening when you press and hold the power button.
While you don’t have to pinpoint the cause of your problem to fix it, you will need a guide to help you quickly.
Today we’ll give you step-by-step instructions for troubleshooting an RCA TV that won’t turn on.
RCA TV Does Not Turn On
To find out more, check out these 3 smart DIY tests.
You can turn on your TV’s remote control by pressing each button one at a moment.
If you don’t have a remote control, your hand can press the buttons in front of the set.
- Remove the TV’s power cord from the outlet.
- Take off the plastic cover plate at the back.
- A multimeter, which is an inexpensive tool that measures current, can be attached to the black wires connecting to the power source.
- The metre will turn on and off when you press the button. When the set is plugged into the wall, the red line will indicate that there is electrical current flowing.
- The set is considered defective if there is no current.
Turn the power on by plugging the set into an AC outlet (such as a regular outlet). The set may not turn on if it does not.
You can still get help if your RCA TV doesn’t turn on
1. Your power cord is blown:
First, check the power cord. Your RCA TV may not turn on if the power cord is frayed or damaged.
If your power cord is damaged, you can simply replace it with another one. Make sure that the tip of your power cord is fully inserted into the back side of your TV.
2. The Power Button is available:
Here’s what to do if your RCA TV won’t turn on because the power button is stuck.
- To push the button gently, use a flat-headed screwdriver.
- If that fails, you can use a thin object like a paperclip or straightened paper to press the button.
- Then, remove the battery from the remote control. Next, press the power button for a minimum of 10 seconds.
- Next, place the battery in the remote control again and then press the power button.
Is your RCA TV now on? Try pushing the power button with a different method if it doesn’t turn on. If this doesn’t work, you can call an expert to fix it.
3. You should check if your television has a short circuit:
If your RCA TV still won’t turn on despite all of the above, it may be a short circuit.
This can be done by removing the television’s back cover and checking the metal connectors (also known as the pins), that are attached to the power cord.
If one of the connections isn’t correct, your RCA TV won’t turn on if there is a short circuit.
You can replace the pin that is faulty with a new one, and then you can try again. Make sure that the television is not plugged in.
They will cause a short circuit, which can lead to the same outcome. Simply tighten the wires to ensure they are secure.
4. Poor Connection Between TV and your remote control:
Try pressing the button on a universal remote controller that has the letter L on it.
This will allow you to verify that the connection between your remote and your TV is working correctly.
If the remote control doesn’t work, your TV won’t turn on.
Take out the batteries from your remote control. Now, hold the power button for 30 seconds. Do this for 30 seconds. Do this for 30 seconds, not 10!
Once the 30 seconds have expired, you can put the batteries in the remote again and turn on your TV. The TV should turn on again.
To be certain, you might consider buying a new set of batteries.
You can simply change the batteries in your remote controller and then try again.
5. The Fuse is checked:
Older RCA TVs have a fuse at the back that controls the power supply. This fuse can become damaged over time. In this case, replace the fuse and try again.
If your fuse is good but the RCA TV still isn’t turning on, check the next issue.
6. The Surge Protector is available here:
Surge protectors protect your home electronics from surges of electrical current.
A faulty surge protector can also cause your RCA TV not to work.
Simply remove the surge protector and plug your TV back into the socket.
If it works, then the surge protector is the problem and you should buy another one. If it doesn’t work, the problem is elsewhere.
7. You can find HDMI cables here:
An HDMI input is available on RCA TVs. This allows you to connect your HDTV with a satellite receiver or cable box.
Sometimes, the cable or satellite company may block the connection between your RCA television and your equipment. It may prevent your TV from turning on.
You can check to see if it is true:
- Just unplug the RCA TV’s wall socket
- Take out the RCA plugs at the ends of your HDMI cable
- Then, reconnect everything.
This will allow you to access your programs without interruptions if your satellite or cable provider blocks the connection.
If none of these methods work, you can contact an electrician to inspect the wiring in your house and ensure it is safe.
8. Get rid of dust from your TV by cleaning it:
Your television can be damaged by dirt and dust.
It can also cause the TV to stop functioning altogether. Static electricity can also be caused by dirt and dust, which can cause damage to your TV.
It is therefore important to keep your TV clean.
Clean the TV
- Damp cloth can help to wipe the TV clean
- Make sure that your TV set is free from dust and debris
- Then blow it up with a shop vacuum or a hose.
- This will make your RCA TV available again.
9. Reset Your RCA TV:
Click the Home button on the remote.
Next, go to Settings > System > Advanced System Setting > Factory Reset > Factory Set Everything. The initial setup screen will then be displayed on your TV.
RCA TVs feature a reset button at the front.
Press the reset button for at least 10 seconds. Next, remove your TV from the wall. Then plug it back in.
You should now be able to turn on your TV. If you have any problems, contact an electrician.
The Manual is available here:The instructions for maintaining your TV’s condition will be found in your RCA manual. If they are included, follow them. You may have to contact an electrician if you don’t follow the instructions.
10. Unplug RCA TVs from walls:
This is a simple fix, but it is not the easiest. Unplug your RCA TV from its wall socket and wait for the full 60 seconds. Be patient and wait at least one minute before you plug it back in.
For 30 seconds, unplug the TV and find the power button on the RCA TV. You should make sure that you hold the power button on your TV and not your remote. The power button is likely to be located on the back or in the centre of the TV.
This will drain any remaining power and allow the TV to soft reset. This is a different method than just turning the remote on/off.
After the 60 second delay, plug the TV back into the power outlet and it should turn on again.
This solution should be effective in about 80% of cases.
11. Choose the Right Input Source:
An incorrect input source could cause your RCA TV to appear not working. For your TV to function correctly, you must choose the correct input source.
Double-check that the HDMI port number on your HDMI source/input is correct, regardless of whether you are using a streaming device or DVD player.
12. Control of the Environment:
The front panel lock is the parental control feature on the RCA TV. If this feature is enabled, the remote control will not work to turn on the TV. If the RCA TV doesn’t turn on, it is possible that the front panel lock has been enabled. After a few minutes, the RCA TV will turn on. To do this, remove the power cable from the TV and then insert it again.
Professional help is required if the RCA TV won’t turn on after you have tried all of the troubleshooting options.
That’s it. These tips will help ensure your RCA TV stays in top condition for a long time.
These tips are not likely to be used. If any of these tips are necessary, you need to know how to care for your RCA TV.